Custom adapters
JIC to ORFS adapters, machined to order
One machined part that connects JIC 37° (AN) to ORFS (O ring face seal) in the exact sizes you need, instead of a stack of off the shelf adapters. Pick the shape, material and finish, see the price as you go, and get it in 2 weeks.
Common sizes
Straight adapters in 303 stainless, priced each at 10 pieces. Any size is available on either end, and you can change the shape, length, bore and material in the builder.
| JIC end | ORFS end | Rated to | Each at 10 | |
|---|---|---|---|---|
| -4 JIC male | -4 ORFS male | 4,750 psi | $16.80 | Build this |
| -5 JIC male | -6 ORFS male | 4,750 psi | $18.97 | Build this |
| -6 JIC male | -6 ORFS male | 4,750 psi | $19.03 | Build this |
| -8 JIC male | -8 ORFS male | 4,270 psi | $21.32 | Build this |
| -10 JIC male | -10 ORFS male | 3,320 psi | $27.05 | Build this |
| -12 JIC male | -12 ORFS male | 3,320 psi | $30.69 | Build this |
| -16 JIC male | -16 ORFS male | 2,850 psi | $43.50 | Build this |
| -20 JIC male | -20 ORFS male | 2,370 psi | $55.30 | Build this |
| -24 JIC male | -24 ORFS male | 1,900 psi | $68.00 | Build this |
Ratings are for 303 stainless at room temperature, limited by the lower rated end. Single parts start at $120.
About JIC
37° flare fitting that seals metal to metal on the flare seat. It shares the seat angle and threads with AN fittings, so a -6 JIC mates with a -6 AN. The most common hydraulic hose end in North America and the standard for motorsport fuel lines.
SAE J514. Seals by: 37° flare metal seat.
About ORFS
O ring face seal fitting. An O ring in the face compresses against a flat mating face, making it one of the most leak resistant connections under high pressure and vibration. Common on construction, forestry and agricultural equipment.
SAE J1453. Seals by: o ring on flat face.
One part, fewer leaks
A single machined adapter replaces a stack of two or three, so there are fewer joints to leak and the run is shorter and lighter.
Any shape
Straight, 45°, 90°, street 90, tee, Y, cross or a manifold with up to 8 outlets. Stainless, steel, brass, aluminum or engineering plastics.
Checked before it ships
Threads are checked with go and no-go gauges and every order ships with a certificate of conformance. Pressure test reports on request.
Questions
What pressure is a JIC to ORFS adapter rated for?
It depends on the size and material. In 303 stainless, the common sizes on this page are rated from 1,900 to 4,750 psi, set by the lower rated end. The builder shows the exact rating for your part, including a wall thickness check.
Can I get a JIC to ORFS adapter as an elbow or tee?
Yes. Choose straight, 45°, 90°, street 90, tee, cross or a manifold, then set the length, bore, material and finish. The price and pressure rating update as you design.
How many do I have to order?
There is no minimum. Single parts start at $120, pairs at $55 each, and the price per part drops as quantity goes up.
How fast will it ship?
Standard orders ship in 2 weeks. 1 week and 3 day delivery are available. Every thread is gauged, and every order ships with a certificate of conformance.
Need a size or shape not listed?
Every combination of 24 standards is available in the builder.
Open the builder