Custom adapters
Luer to Micro thread adapters, machined to order
One machined part that connects Luer to micro thread (10-32, M5, 1/4-28) in the exact sizes you need, instead of a stack of off the shelf adapters. Pick the shape, material and finish, see the price as you go, and get it in 2 weeks.
Common sizes
Straight adapters in 303 stainless, priced each at 10 pieces. Any size is available on either end, and you can change the shape, length, bore and material in the builder.
| Luer end | Micro thread end | Rated to | Each at 10 | |
|---|---|---|---|---|
| Female Luer lock | M3 male | 100 psi | $13.42 | Build this |
| Female Luer lock | #6-40 male | 100 psi | $13.41 | Build this |
| Female Luer lock | M4 male | 100 psi | $13.45 | Build this |
| Female Luer lock | #10-32 male | 100 psi | $13.44 | Build this |
| Female Luer lock | M5 male | 100 psi | $13.45 | Build this |
| Female Luer lock | M6 male | 100 psi | $13.48 | Build this |
| Female Luer lock | 1/4-28 male | 100 psi | $13.49 | Build this |
Ratings are for 303 stainless at room temperature, limited by the lower rated end. Single parts start at $120.
About Luer
Medical and lab connector with a 6% taper, as male slip or female lock. Used on medical devices, lab equipment and fluidics.
ISO 80369-7 Luer, 6% taper. Seals by: conical metal or plastic seal.
About Micro thread
Small instrument threads such as 10-32 UNF, M5 and 1/4-28, sealed with an O ring or bonded washer. Used for sensors, pneumatic valves, fluidics and test ports.
ISO 261, ASME B1.1. Seals by: o ring or bonded washer.
One part, fewer leaks
A single machined adapter replaces a stack of two or three, so there are fewer joints to leak and the run is shorter and lighter.
Any shape
Straight, 45°, 90°, street 90, tee, Y, cross or a manifold with up to 8 outlets. Stainless, steel, brass, aluminum or engineering plastics.
Checked before it ships
Threads are checked with go and no-go gauges and every order ships with a certificate of conformance. Pressure test reports on request.
Questions
What pressure is a Luer to Micro thread adapter rated for?
It depends on the size and material. In 303 stainless, the common sizes on this page are rated from 100 to 100 psi, set by the lower rated end. The builder shows the exact rating for your part, including a wall thickness check.
Can I get a Luer to Micro thread adapter as an elbow or tee?
Yes. Choose straight, 45°, 90°, street 90, tee, cross or a manifold, then set the length, bore, material and finish. The price and pressure rating update as you design.
How many do I have to order?
There is no minimum. Single parts start at $120, pairs at $55 each, and the price per part drops as quantity goes up.
How fast will it ship?
Standard orders ship in 2 weeks. 1 week and 3 day delivery are available. Every thread is gauged, and every order ships with a certificate of conformance.
Need a size or shape not listed?
Every combination of 24 standards is available in the builder.
Open the builder